Small LVDS transmitter to convert TTL into LVDS signals. The TTS input signals may be given at 18 bit or 24 bit rates. The output is effected conform to the input signals in 18 or 24 bit. A binary adjustment from 18 to 24 or from 24 to 18 bit will not be carried out.
A 44-pin connector (pitch 2.00 mm) transmits the input signals to the board. The converter chip produces a serial LVDS data stream from the digital TTL signals compatible to up-to-date LVDS displays. The advantage of this technology is a significantly low malfunction rate. It also allows an open-door design since the signals can be transmitted by much longer ranges of up to 15 meters. Possibly special cables are required.
So even with an older graphics system a modern display can be connected. Please note that this assembly has no scaling function. The dimension of the picture area must be displayed natively by the graphic controller. This has to be programmed and set in the graphic controller.
The bandwidth of this receiver is specified from 20 MHz to 85 MHz.
Additionally there is a way of loop-through-wires to ease the connection with inverters and optional hardware like USB or touch screens. Please refer to chapter 5 (OPTx).
- Länge / Lenght: 62,2 mm
- Breite / Width: 34,2 mm
- Höhe / hight: 11,5 mm
Range of temperatures
- Betriebstemperatur / Operating temperature: Min: -20,00 °C Max: 85,00 °C
- Lagertemperatur / Storage temperature: Min: -40,00 °C Max: 85,00 °C
- Bruttogewicht / Gross weight: 12,90 g
- Nettogewicht / Net weight: 10,33 g
Do you have a question regarding the product?
Just send us a message with this contact form and we usually will get back to you within 24 hours at work days.
Is your request more urgent?
Then please call the contact person for this product.
He will be pleased to help you.
- Volker Wehnen