This adapter set is designed to extend CompactFlash (CF) sockets. Simply plug in the CF card into your socket and mount the new socket within the device where needed. This is the solution to change the place of your CompactFlash (CF).
This adapter allows an easy service. Updates and Flash operations can be carried out without removing the mainboard even if the CompactFlash socket is mounted on the soldering side of a board.
The difference between our standard adapters e.g. ADA-COMPACTFLASH-EXTENDER-0430FFCand this adapter set is that no conventional FFC (Flexible Foil Cable) is used. In this case a Flexible Printed Circuit FPC is applied. The FPC is two-ply and shows a higher ruggedness towards electro-magnetic compatibility.
The extension of the cable length can cause interferences. We recommend to use this adapter with CF cards from P/O Mode 4 or DMA Mode. The following CFs have been tested by us and have been approved as to their function (Transcend Compactflash 133 x 2 GB and SanDisk Compactflash 4.0 GB). We do not take any responsibility for interferences in transmission.
A minimum radius of 5 mm must be observed. NO FOLDING of the FPC! Folding causes an irreparable breakage of the inner conductor!
- Länge / Length: 530,0 mm
- Breite / Width: 59,4 mm
- Höhe / Height: 5,4 mm
Range of temperatures
- Betriebstemperatur / Operating temperature : Min: -20,00 °C Max: 85,00 °C
- Lagertemperatur / Storage temperature: Min: -20,00 °C Max: 85,00 °C
- Bruttogewicht / Gross weight: 80,5 g
- Nettogewicht / Net weight: 61,9 g
Do you have a question regarding the product?
Just send us a message with this contact form and we usually will get back to you within 24 hours at work days.
Is your request more urgent?
Then please call the contact person for this product.
He will be pleased to help you.
- Volker Wehnen