ADA-LVDS-RX-TWIN

A small LVDS receiver to transform LVDS into TTL signals. The LVDS input signals may be given as 18 bit or 24 bit rates. The output is effected conform to the input signals in 18 or 24 bit. A binary adjustment from 18 to 24 or from 24 to 18 bit will not be carried out. The TTL output always has an 18 bit signal factor. Surplus bits (LSB’s) are not used. There are two connectors ESDCI18 for 18 bit input (I) and 24 bit input(II).

A 20-pin connector (pitch 1.25 mm) transmits the input signals to the board. The converter chip produces a parallel TTL data stream from the LVDS signals compatible to former standard TTL displays. The advantage of the LVDS technology is a significantly low malfunction rate. It also allows an open-door design since the signals can be transmitted by much longer ranges of up to 15 meters. Possibly special cables are required.

So even a modern controller with LVDS on board can be connected to an older display. Please note that this assembly has no scaling function. The dimension of the picture area must be displayed natively by the graphic controller. This has to be programmed and set in the graphic controller.

Electrical data:

Power consumption:
At Vin = 3.3V     Imax = 120mA at 25°C
At Vin = 5V        Imax = 150mA at 25°C + displaycurrent up to max. 650mA

This part is also available as customized design. Please contact us. We would be glad to support you.

Kontakt

Do you have any question regarding this product?

Product contact form

Ansprechpartner

Portrait von Volker Wehnen
  • Volker Wehnen

ADA-LVDS-RX-TWIN

Images

{

ADA-LVDS-RX-TWIN

Dimensions

  • Länge / Lenght: 67,0 mm
  • Breiten / Width: 41,0 mm
  • Höhe / Height: 10,0 mm

Range of temperatures

  • Betriebstemperatur / Operating temperature: Min: -20,00 °C Max: 85,00 °C
  • Lagertemperatur / storage temperature: Min: -40,00 °C Max: 85,00 °C

Weight

  • Bruttogewicht / Gross weight: 17,97 g
  • Nettogewicht / Net weight: 15,24 g

Electrical connections

Electronic connection´s for ADA-LVDS-RX-TWIN

Jumper settings

Jumper settings for ADA-LVDS-RX-TWIN

ADA-LVDS-RX-TWIN

Contact form

Do you have a question regarding the product?
Just send us a message with this contact form and we usually will get back to you within 24 hours at work days.
Is your request more urgent?
Then please call the contact person for this product.
He will be pleased to help you.

Ansprechpartner

Portrait von Volker Wehnen
  • Volker Wehnen

ADA-LVDS-RX-TWIN

All fields marked with * are mandatory.
Thank you!

Product categories